700W Micro Inverter Solar Grid Tie Microinverter IP65 WiFi Control Self Cooling 120/230V Automatic Identification Power Inverters

Brand: Walfront

Color: Black

Features:

• Founction: The micro inverter can achieve maximum power point tracking, which maximizes the overall output power. Built‑in high‑accuracy meter, you can see the working status of each component.
• Safe to Use: The micro inverter can independently control each component in parallel, minimizing potential safety hazards.
• AC Output Voltage: 120V/230V (automatic identification). Rated Output Power: 700W. Operating Temperature Range: -40℃ - +65℃. Waterproof Rating: IP65 NEMA3R. Cooling Method: Self-cooling. Rated Frequency Range: 48-51Hz/58-61Hz.
• Convenient Operation and Monitoring: Can be operated and monitored through WiFi or mobile APP, which can greatly improve the overall efficiency. Monitoring System: Mobile APP. The micro inverter can be installed directly behind the module or on the bracket, which is easy to maintain.
• Package List: 1 x Inverter; 1 x User Manual; 1 x Ac Connection Line; 2 x Fixing Screw; 2 x Fixing Nut; 2 x Fixed Gasket; 2 x Fixed Washer.
• It is added that the inverter can not connect to the mobile phone App normally. Please check the following elements: 1. WiFi router needs to set the frequency of 2.4GHz. 2. WiFi signal must be good (it is recommended that the router be placed next to the inverter). 3. Use a better mobile phone. 4. Bluetooth must be turned on.

model number: WVC-700R3-433/WiFi

Part Number: Walfrontm94orqcuaz95

Details: Specification: Item Type: Inverter Model: WVC-700R3-433/WiFi AC Output Voltage: 120V/230V (automatic identification) Rated Output Power: 700W Operating Temperature Range: -40℃ - +65℃ Monitoring System: Mobile APP Waterproof Rating: IP65 NEMA3R Cooling Method: Self-cooling Rated Frequency Range: 48-51Hz/58-61Hz Is NA Protection Built In: Yes How to use: Step 1: Install the inverter on the bracket of the photovoltaic panel with the screws provided with the machine, as shown in the following figure: Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic board to the DC input terminal of the inverter, as shown below: Step 3: Open the waterproof cover of the AC output connector of the inverter and connect the AC cable to the AC waterproof plug. The connection method is as shown in the plug connection diagram: Step 4: Connect the AC output cable to the AC main cable; Step 5: Repeat steps 1 to 3, install and connect all inverters; Step 6: Connect the AC main cable to the utility grid to start your green energy journey. Package List: 1 x Inverter 1 x User Manual 1 x Ac Connection Line 2 x Fixing Screw 2 x Fixing Nut 2 x Fixed Gasket 2 x Fixed Washer Note: Before installing WVC series micro inverter products, please read this manual and pay attention to the installation details. Please note that the old and new type of the product will be sent randomly, and make sure you will not mind before ordering.

Package Dimensions: 13.6 x 12.6 x 4.2 inches