1
/
of
8
Good Sun Solar
60A MPPT Solar Charge Controller 12V 24V 36V 48V Auto Battery Regulator, Solar Panel Max 150V Input for Lithium, Sealed, Gel, and Flooded Batteries (Yellow)
60A MPPT Solar Charge Controller 12V 24V 36V 48V Auto Battery Regulator, Solar Panel Max 150V Input for Lithium, Sealed, Gel, and Flooded Batteries (Yellow)
Regular price
$210.62 USD
Regular price
$0.00 USD
Sale price
$210.62 USD
Unit price
/
per
Tax included.
Shipping calculated at checkout.
Couldn't load pickup availability
- Solar Panel: Fit for 900W(12V);1700W(24V);3400W(48V);Max input Voltage:150V PV
- The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%,、Intelligent maximum power point tracking technology increases efficiency 25%~30%.Ultra-fast tracking speed, tracking 1 times per second.
- LCD Display---clear to see operating data and working condition, Real-time energy statistics function with Multiple load control modes,Chinese and English, multi-function LCD screen and operation menu.
- Display the daily power generation curve and current curve. Display fault records, to facilitate customer troubleshooting in a timely manner.
- Support 4 charging options: Sealed, Gel, Flooded and User-defined.Perfect protection function.
Product Description
OAE 60A MPPT Solar Charge Controller with LCD Display
- Color: Yellow / Blue
- Rated Solar Charge Current: 60A
- Auto 12/24/36/48V battery system
- 150Voc max PV input voltage
- Solar panel: suitable for 900W (12V); 1700W (24V); 2700W (36V); 3400W (48V);
-
MPPT Range Operating Voltage:
- 12V: 18VDC - 80VDC
- 24V: 30VDC - 100VDC
- 36V: 40VDC - 100VDC
- 48V: 60VDC - 150VDC
• Battery temperature compensation function
• Compatible with sealed, gel, flooded, and lithium batteries
• Multiple protections: overcharge/over discharge/ overheat/reverse/overload/short-circuit protection
-
Package Included:
- 1 x 60A MPPT Solar Charge Controller
- 1 x Temperature Sensor
- 1 x User Manual
LCD&LED DisplayEasy operation, details data display in real-time, | Intelligent cooling fanInbuilt real-time temperature monitor, <42℃C slow fan, >45℃C fast fan, protect inverter from overheat. | Fashion air hole designBig enough for air to go in, but small enough to protect inverter from dust |
Attention:
- Always connect battery first !! Make sure enough batteries’ voltage let controller recognize the right system voltage. NEVER connect the solar panel array to the controller without a battery. The disassembly sequence is contrary to the wiring order.
- DO NOT connect any Inverter/ wind/ Alternator or Charger into the charge controller !! Please connect the Inverter directly to the battery.
- Ensure solar input voltage higher 3V or more than batteries’ voltage and total input power in the range. If input power is too low for max input power, it may be appears to have been discontinued, the charging current almost be zero when controller is floating charge.
- The charging indicator is on and off, and the charging current is off and on. This situation generally occurs on cloudy days or in the evening when the light is insufficient, which is a normal phenomenon.
- When the controller is buzzing, it is because the fan is trying to dissipate heat. Please wait patiently.
- DO NOT install the charging controller in direct sunlight to avoid power loss due to overheating. Remove all clutter around the controller to reduce interference and make sure there is enough space for heat dissipation. ( leaving a space of approx. 20cm )
- Ensure all connections going into and from the controller are tight. DO NOT let the positive (+) and negative (-) terminals of the battery touch each other.
| Battery System Voltage | 12/24/36/48V auto | 12/24/36/48V auto |
|---|---|---|
| Max PV Input Voltage | 150V | 150V |
| Connection Terminal | 6AWG | 6AWG |
| LCD Display | ✓ | ✓ |
| RS485 | ✓ | ✓ |
| Dimension | 230*91*313 mm | 230*91*313 mm |
Share
